Download Exam HPE3-U01 Practice Test Questions with 100% Verified Answers
Share Latest HPE3-U01Test Practice Test Questions, Exam Dumps
NEW QUESTION 11
WhichOSImodel layer is in charge of creating data?
- A. Layer 4
- B. Physical
- C. Layer 7
- D. Transport
Answer: D
NEW QUESTION 12
What is the maximum recommended distance for a 1 Gbps Ethernet connection using Cat 6 UTP-based cabling between a host and the switch where it is plugged in?
- A. 50 meters (164 feet)
- B. 300 meters (984 feet)
- C. 100 meters (328 feet)
- D. 15 meters (49 feet)
Answer: C
NEW QUESTION 13
What are characteristics of Aruba Central? (Select two.)
- A. It must be deployed as an on-premises server.
- B. It can manage third-party networking equipment.
- C. It is considered cloud-based network management.
- D. It manages networking equipment using SNMP.
- E. It manages networking equipment using HTTPs.
Answer: B,C
NEW QUESTION 14
Which commands can you use to save the switch configuration changes, so they survive a switch reboot?
(Select two.)
- A. copy running-config checkpoint startup-config
- B. copy running-config checkpoint backup
- C. store memory
- D. write memory
- E. save memory
Answer: A,C
NEW QUESTION 15
At which section of the Aruba Central WLAN configuration Wizard can you set the Role Based controls?
- A. VLANs
- B. Security
- C. General
- D. Access
Answer: D
NEW QUESTION 16
Refer to Exhibit.
PC-1 and PC-2 are connected to Interfaces configured as access ports on VLAN 10. All other ports on Switch-1 and Switch-2 are in default settings. Which configuration is required on Doth switches to allow inter-PC communication in the same Broadcast domain?
- A. Option B
- B. Option D
- C. Option C
- D. Option A
Answer: D
NEW QUESTION 17
Which accurately describes the 051 Model?
- A. It is a reference model that explains how data is created by the application layer.
- B. It is a reference model that describes how data communications occur on a network.
- C. It is a reference model that is used to convert binary bits into analog signals.
- D. It is a reference model that describes data flow over the network using four layers.
Answer: B
NEW QUESTION 18
Which table must clients populate to remember the L2 addressing of their neighbors?
- A. MAC Table
- B. ARP Table
- C. Routing Table
- D. Ethernet Table
Answer: A
NEW QUESTION 19
Which protocol provides logical addressing used for routing messages across the network towards their destination?
- A. Internet Protocol
- B. Link Layer Discovery Protocol
- C. Transmission Control Protocol
- D. Wired Ethernet
Answer: A
NEW QUESTION 20
Whichcondition allows 5Ghz channels to avoid Adjacent Channel Interference?
- A. transmit at low power levels
- B. transmit at high power levels
- C. transmit at 20 MHz bandwidth
- D. transmit at 40 MHz bandwidth
Answer: D
NEW QUESTION 21
Which configurable switchport feature makes collisions impossible to occur?
- A. VLANs
- B. full-duplex
- C. half-duplex
- D. auto speed
Answer: B
NEW QUESTION 22
What do the digits in the ArubaOS-CX switch interface numbering represent?
- A. Module/Slot/Port
- B. Stack/Member/Port
- C. Member/Slot/Port
- D. Slot/Member/Port
Answer: B
NEW QUESTION 23
How many addresses does the 255.255.252.0 provide?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION 24
Which accurately describes the TCP/IP Model? (Select two.)
- A. It specifies how to compress, fragment, encrypt, and analyze data.
- B. It is a set of communication protocols used on TCP-based networks only.
- C. It specifies how to assemble, address, transmit, route, and disassemble a data packet.
- D. It is a set of communication protocols used on Ethernet-based networks only.
- E. It is a set of communication protocols used on IP-based networks only.
Answer: C,E
NEW QUESTION 25
Which device provides high ethernet port density for connecting wired clients such as computers, IP phones, and printers? (Select two.)
- A. Switches
- B. Wireless Router
- C. Router
- D. Multilayer Switches
- E. Access Point
Answer: D,E
NEW QUESTION 26
Which protocol performs name to IP resolution?
- A. DNS
- B. LLDP
- C. DHCP
- D. FTP
Answer: A
NEW QUESTION 27
Which Wi-Fi frame announces the Service Set Identifier (SSID) to Basic Service Set Identifier (BSSID) mapping?
- A. network allocation vector
- B. probe request
- C. association request
- D. beacon
Answer: B
NEW QUESTION 28
Which command should you enter to access the second interface of the third slot in a modular ArubaOS-CX switch?
- A. Interface 1/3/2
- B. Interface 3/1/2
- C. Interface 0/3/2
- D. Interface 0/2/3
Answer: B
NEW QUESTION 29
What is the binary equivalent of the decimal number of 233?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION 30
Which commands are required to configure interfaces 1 /1/1 and 1 /1/2 as VLAN 10 access ports in ArubaOS-CX switches?
- A. Option B
- B. Option A
- C. Option C
- D. Option D
Answer: D
NEW QUESTION 31
You are managing an ArubaOS-CX switch using the CLl. The current prompt reads "Switch(config-if>#".
Which single CLI command should you issue to move back to the Manager context?
- A. end
- B. quit
- C. disable
- D. exit
Answer: A
NEW QUESTION 32
Which statement accurately describes an omnidirectional antenna?
- A. Radiates equal power in all directions in the Elevation Plane.
- B. Radiates almost equal power in all directions in the Vertical Plane.
- C. Radiates almost equal power in all directions in the Horizontal Plane.
- D. Radiates more power in a specific angle and less power in others.
Answer: A
NEW QUESTION 33
......
HP HPE3-U01 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
Positive Aspects of Valid Dumps HPE3-U01 Exam Dumps!: https://quizguide.actualcollection.com/HPE3-U01-exam-questions.html