[Feb 21, 2023] Latest Questions 1Y0-231 Guide to Prepare Free Practice Tests [Q39-Q62]

Share

[Feb 21, 2023] Latest Questions 1Y0-231 Guide to Prepare Free Practice Tests

Reliable 1Y0-231 Dumps Questions Available as Web-Based Practice Test Engine

NEW QUESTION 39
Scenario: A Citrix Administrator configured SNMP to send traps to an external SNMP system. When reviewing the messages, the administrator notices several entity UP and entity DOWN messages.
To what are these messages related?

  • A. High availability nodes
  • B. SSL certificate
  • C. VLAN
  • D. Load-balancing virtual servers

Answer: D

 

NEW QUESTION 40
Scenario: A Citrix Administrator configured the policies below:
POLICY 1:
add rewrite action ACT_1 corrupt_http_header Accept-Encoding
add rewrite policy POL_1 HTTP.REQ.IS_VALID ACT_1
POLICY 2:
add rewrite action ACT_2 insert_http_header Accept-Encoding "\"identity\"" add rewrite policy POL_2 "HTTP.REQ.IS_VALID" ACT_2 Which set of commands can the administrator use to bind the rewrite policies to the LB vserver lb_vsrv so that POL_2 is evaluated after POL_1 is evaluated successfully?

  • A. bind lb vserver lb_vsrv -policyName POL_1 -priority 90 -gotoPriorityExpression NEXT -type REQUEST bind lb vserver lb_vsrv -policyName POL_2 -priority 100 -gotoPriorityExpression END -type REQUEST
  • B. bind lb vserver lb_vsrv -policyName POL_1 -priority 90 -gotoPriorityExpression END -type REQUEST bind lb vserver lb_vsrv -policyName POL_2 -priority 80 -gotoPriorityExpression NEXT -type REQUEST
  • C. bind lb vserver lb_vsrv -policyName POL_1 -priority 110 -gotoPriorityExpression NEXT -type REQUEST bind lb vserver lb_vsrv -policyName POL_2 -priority 100 -gotoPriorityExpression END -type REQUEST
  • D. bind lb vserver lb_vsrv -policyName POL_1 -priority 90 -type REQUEST bind lb vserver lb_vsrv -policyName POL_2 -priority 100 -type REQUEST

Answer: C

 

NEW QUESTION 41
If a user device does NOT comply with a company's security requirements, which type of policy can a Citrix Administrator apply to a Citrix Gateway virtual server to limit access to Citrix Virtual Apps and Desktops resources?

  • A. Session
  • B. Traffic
  • C. Responder
  • D. Authorization

Answer: A

Explanation:
Explanation/Reference: https://www.citrix.com/content/dam/citrix/en_us/documents/products-solutions/creating-and- enforcing-advanced-access-policies-with-xenapp.pdf

 

NEW QUESTION 42
In a single-hop deployment, a Citrix Administrator needs to use a client's IP address as the source IP address for Citrix ADC-to-server connections.
Which Citrix ADC mode can the administrator use to meet this requirement?

  • A. USNIP
  • B. Layer 2
  • C. USIP
  • D. Layer 3

Answer: C

 

NEW QUESTION 43
A Citrix Administrator wants to configure independent and isolated access on a single appliance to allow three different departments to manage and isolate their own applications.
What can the administrator configure to isolate department-level administration?

  • A. Policy-based routes for each department in the nsroot partition
  • B. Dedicated routes in the admin partitions for each department
  • C. Admin partitions that use dedicated VLANs
  • D. A VIP in each partition, and bind a VLAN for the department

Answer: C

 

NEW QUESTION 44
Scenario: A Citrix Administrator manages an environment that has three SSL websites, all serving the same content.
www.company.com
www.company.net
www.company.org
The administrator would like to consolidate the websites into a single, load-balanced SSL virtual server.
What can the administrator bind to use a single SSL virtual server?

  • A. A wildcard certificate to a single SSL virtual server
  • B. The certificate of each website to a single SSL virtual server
  • C. A wildcard certificate to a content-switching virtual server
  • D. A multiple SAN certificate to a single SSL virtual server

Answer: D

 

NEW QUESTION 45
A Citrix Administrator needs to integrate an existing certification-based authentication policy into an existing Citrix Gateway virtual server.
Which three steps can the administrator take to accomplish this? (Choose three.)

  • A. Enable client authentication on the SSL parameters of the virtual server.
  • B. Change the client certificate to mandatory on the SSL parameters of the virtual server.
  • C. Enable the two-factor option on the existing CERT authentication profile.
  • D. Bind the existing CERT authentication policy to the Citrix Gateway virtual server.
  • E. Create a CERT authentication policy and bind it to the Citrix Gateway virtual server.

Answer: A,B,E

 

NEW QUESTION 46
A Citrix Administrator needs to configure a Citrix Gateway virtual IP to allow incoming connections initiated exclusively from web browser sessions.
Which advanced policy will accomplish this?

  • A. REQ.HTTP.HEADER User-Agent CONTAINS Chrome/78.0.3904.108 Safari/537.36
  • B. HTTP.REQ.HEADER("User-Agent").CONTAINS("Mozilla")
  • C. HTTP.REQ.HEADER("User-Agent").CONTAINS("CitrixReceiver")
  • D. REQ.HTTP.HEADER User-Agent NOTCONTAINS CitrixReceiver

Answer: D

 

NEW QUESTION 47
Scenario: A Citrix Administrator would like to grant access to a Junior Citrix Administrator on the Citrix ADC.
The administrator would like to grant full access to everything except:
Shell
User configuration
Partition configuration
Which preexisting command policy would meet the needs of this scenario?

  • A. Network
  • B. Operator
  • C. Sysadmin
  • D. Superuser

Answer: C

 

NEW QUESTION 48
A Citrix Administrator needs to integrate an existing certification-based authentication policy into an existing Citrix Gateway virtual server.
Which three steps can the administrator take to accomplish this? (Choose three.)

  • A. Enable client authentication on the SSL parameters of the virtual server.
  • B. Change the client certificate to mandatory on the SSL parameters of the virtual server.
  • C. Enable the two-factor option on the existing CERT authentication profile.
  • D. Bind the existing CERT authentication policy to the Citrix Gateway virtual server.
  • E. Create a CERT authentication policy and bind it to the Citrix Gateway virtual server.

Answer: A,B,E

Explanation:
Reference:
cert-authentication/ng-client-cert-vserver-and-bind-tsk.html

 

NEW QUESTION 49
Scenario: A Citrix Administrator configured SNMP to send traps to an external SNMP system. When reviewing the messages, the administrator notices several entity UP and entity DOWN messages.
To what are these messages related?

  • A. High availability nodes
  • B. SSL certificate
  • C. VLAN
  • D. Load-balancing virtual servers

Answer: D

Explanation:
Explanation/Reference: https://www.reddit.com/r/Citrix/comments/bamiez/ns_study_question_help/

 

NEW QUESTION 50
Scenario: A Citrix Administrator currently manages a Citrix ADC environment for a growing retail company that may soon double its business volume. A Citrix ADC MPX 5901 is currently handling web and SSL transactions, but is close to full capacity. Due to the forecasted growth, the administrator needs to find a costeffective solution.
Which cost-effective recommendation can the administrator provide to management to handle the growth?

  • A. A license upgrade to a Citrix ADC MPX 5905
  • B. A hardware upgrade to a Citrix ADC MPX 8905
  • C. A hardware upgrade to a Citrix ADC SDX 15020
  • D. The addition of another MPX 5901 appliance

Answer: A

 

NEW QUESTION 51
Scenario: A Citrix Administrator configured Citrix ADC load balancing to send requests to one of three identical backend servers. Each server handles multiple protocols, and load balancing is set up in round-robin mode. The current load-balancing setup on the Citrix ADC is:
* One load-balancing virtual server with one externally accessible VIP
* One service created for each protocol type
* One server entity for each backend resource
During business hours, the administrator wants to make changes to one backend server without affecting the other servers What is the most efficient way for the administrator to ensure that all traffic is routed away from the server without impeding responses from other resources?

  • A. Disable the backend service entity targeted for change.
  • B. Unbind the correct server entity from the load-balancing virtual server.
  • C. Disable the backend server entity targeted for change.
  • D. Disable the load-balancing virtual server.

Answer: B

 

NEW QUESTION 52
While applying a new Citrix ADC device, a Citrix Administrator notices an issue with the time on the appliance.
Which two steps can the administrator perform to automatically adjust the time? (Choose two.)

  • A. Enable NTP synchronization.
  • B. Configure an NTP monitor.
  • C. Add an NTP server.
  • D. Add an SNMP manager.
  • E. Add an SNMP trap.

Answer: A,C

Explanation:
https://docs.citrix.com/en-us/citrix-adc/current-release/system/basic-operations.html#how-to-synchronize-system-clock-with-servers-on-the-network

 

NEW QUESTION 53
Which three Citrix Gateway elements can be configured by the Citrix Gateway Wizard? (Choose three.)

  • A. The bind SSL server certificate for the Citrix Gateway virtual server
  • B. The responder policy for HTTP to HTTPS redirect
  • C. The Citrix Gateway primary virtual server
  • D. The rewrite policy for HTTP to HTTPS redirect
  • E. The primary and optional secondary authentications

Answer: A,C,E

Explanation:
Explanation/Reference: https://docs.citrix.com/en-us/citrix-gateway/12-1/citrix-gateway-12.1.pdf (333)

 

NEW QUESTION 54
Scenario: A Citrix Administrator needs to integrate LDAP for Citrix ADC system administration using current Active Directory (AD) groups. The administrator created the group on the Citrix ADC, exactly matching the group name in LDAP.
What can the administrator bind to specify the permission level and complete the LDAP configuration?

  • A. A command policy to the group
  • B. Users to the group on the Citrix ADC
  • C. An authentication, authorization, and auditing (AAA) action to the group
  • D. A nested group to the new group

Answer: A

Explanation:
Explanation/Reference: https://support.citrix.com/article/CTX123782

 

NEW QUESTION 55
Scenario: A Citrix Administrator needs to integrate LDAP for Citrix ADC system administration using current Active Directory (AD) groups. The administrator created the group on the Citrix ADC, exactly matching the group name in LDAP.
What can the administrator bind to specify the permission level and complete the LDAP configuration?

  • A. A command policy to the group
  • B. Users to the group on the Citrix ADC
  • C. An authentication, authorization, and auditing (AAA) action to the group
  • D. A nested group to the new group

Answer: A

 

NEW QUESTION 56
Scenario: A Citrix ADC MPX is using one of four available 10G ports. A Citrix Administrator discovers a traffic bottleneck at the Citrix ADC.
What can the administrator do to increase bandwidth on the Citrix ADC?

  • A. Purchase another Citrix ADC MPX appliance.
  • B. Add another 10G Citrix ADC port to the switch, and configure link aggregation control protocol (LACP).
  • C. Add two more 10G Citrix ADC ports to the network and configure VLAN.
  • D. Plug another 10G Citrix ADC port into the router.

Answer: C

 

NEW QUESTION 57
Users accessing a published application through a Citrix Gateway virtual server require SSO to a StoreFront server using an external, secure, single URL.
Which type of virtual server can the administrator use to meet this requirement?

  • A. Unified Gateway
  • B. VPN
  • C. Load Balancing
  • D. Priority Load Balancing

Answer: A

 

NEW QUESTION 58
A Citrix Administrator configured a load-balancing virtual server to utilize the least bandwidth load-balancing method. A service attached to this virtual server is brought into the effective state during production hours.
During the startup of a virtual server, which load-balancing method is used by default?

  • A. Round-robin
  • B. Least connections
  • C. Least bandwidth
  • D. Custom load

Answer: B

 

NEW QUESTION 59
Which authentication type can a Citrix Administrator use to enable Citrix ADC authentication, authorization, and auditing (AAA) dual-factor authentication from a user's mobile device app?

  • A. LOCAL
  • B. SAML
  • C. LDAP
  • D. RADIUS

Answer: C

Explanation:
Explanation/Reference: https://docs.citrix.com/en-us/citrix-adc/current-release/system/authentication-and-authorization-for- system-user/two-factor-authentication-for-system-users-and-external-users.html

 

NEW QUESTION 60
A Citrix Administrator needs to configure a Citrix Gateway virtual IP to allow incoming connections initiated exclusively from web browser sessions.
Which advanced policy will accomplish this?

  • A. REQ.HTTP.HEADER User-Agent CONTAINS Chrome/78.0.3904.108 Safari/537.36
  • B. HTTP.REQ.HEADER("User-Agent").CONTAINS("Mozilla")
  • C. HTTP.REQ.HEADER("User-Agent").CONTAINS("CitrixReceiver")
  • D. REQ.HTTP.HEADER User-Agent NOTCONTAINS CitrixReceiver

Answer: D

Explanation:
Explanation/Reference: https://stalhood2.rssing.com/chan-58610415/all_p2.html

 

NEW QUESTION 61
Scenario: A Citrix Administrator needs to test a SAML authentication deployment to be used by internal users while accessing several externally hosted applications. During testing, the administrator notices that after successfully accessing any partner application, subsequent applications seem to launch without any explicit authentication request.
Which statement is true regarding the behavior described above?

  • A. It is expected if all partner organizations use a common SAML service provider (SP).
  • B. It is expected due to SAML authentication successfully logging on to all internal applications.
  • C. It is expected if the Citrix ADC appliance is the common SAML identity provider (IdP) for all partners.
  • D. It indicates the SAML authentication has failed and the next available protocol was used.

Answer: B

 

NEW QUESTION 62
......

Correct and Up-to-date Citrix 1Y0-231 BrainDumps: https://quizguide.actualcollection.com/1Y0-231-exam-questions.html