[Oct 29, 2025] New VMware 2V0-41.24 Dumps with Test Engine and PDF (New Questions)
Pass Your 2V0-41.24 Exam Easily - Real 2V0-41.24 Practice Dump Updated
VMware 2V0-41.24 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
NEW QUESTION # 65
A company Is deploying NSX micro-segmentation in their vSphere environment to secure a simple application composed of web. app, and database tiers.
The naming convention will be:
* WKS-WEB-SRV-XXX
* WKY-APP-SRR-XXX
* WKI-DB-SRR-XXX
What is the optimal way to group them to enforce security policies from NSX?
- A. Create an Ethernet based security policy.
- B. Do a service insertion to accomplish the task.
- C. Use Edge as a firewall between tiers.
- D. Group all by means of tags membership.
Answer: D
Explanation:
The answer is C. Group all by means of tags membership.
Tags are metadata that can be applied to physical servers, virtual machines, logical ports, and logical segments in NSX. Tags can be used for dynamic security group membership, which allows for granular and flexible enforcement of security policies based on various criteria1 In the scenario, the company is deploying NSX micro-segmentation to secure a simple application composed of web, app, and database tiers.
The naming convention will be:
WKS-WEB-SRV-XXX
WKY-APP-SRR-XXX
WKI-DB-SRR-XXX
The optimal way to group them to enforce security policies from NSX is to use tags membership. For example, the company can create three tags: Web, App, and DB, and assign them to the corresponding VMs based on their names. Then, the company can create three security groups: Web-SG, App-SG, and DB-SG, and use the tags as the membership criteria. Finally, the company can create and apply security policies to the security groups based on the desired rules and actions2 Using tags membership has several advantages over the other options:
It is more scalable and dynamic than using Edge as a firewall between tiers. Edge firewall is a centralized solution that can create bottlenecks and performance issues when handling large amounts of traffic3 It is more simple and efficient than doing a service insertion to accomplish the task. Service insertion is a feature that allows for integrating third-party services with NSX, such as antivirus or intrusion prevention systems. Service insertion is not necessary for basic micro-segmentation and can introduce additional complexity and overhead.
It is more flexible and granular than creating an Ethernet based security policy. Ethernet based security policy is a type of policy that uses MAC addresses as the source or destination criteria. Ethernet based security policy is limited by the scope of layer 2 domains and does not support logical constructs such as segments or groups.
To learn more about tags membership and how to use it for micro-segmentation in NSX, you can refer to the following resources:
VMware NSX Documentation: Security Tag 1
VMware NSX Micro-segmentation Day 1: Chapter 4 - Security Policy Design 2 VMware NSX 4.x Professional: Security Groups VMware NSX 4.x Professional: Security Policies
NEW QUESTION # 66
Which NSX feature can be leveraged to achieve consistent policy configuration and simplicity across sites?
- A. VRF Lite
- B. NSX Federation
- C. Ethernet VPN
- D. NSX MTML5 UI
Answer: B
Explanation:
According to the VMware NSX Documentation, this is the NSX feature that can be leveraged to achieve consistent policy configuration and simplicity across sites:
NSX Federation: This feature allows you to create and manage a global network infrastructure that spans across multiple sites using a single pane of glass. You can use this feature to synchronize policies, segments, gateways, firewalls, VPNs, load balancers, and other network services across sites.
NEW QUESTION # 67
Which three NSX Edge components are used for North-South Malware Prevention? (Choose three.)
- A. Thin Agent
- B. Security Analyzer
- C. Reputation Service
- D. Security Hub
- E. RAPID
- F. IDS/IPS
Answer: D,E,F
Explanation:
https://docs.vmware.com/en/VMware-NSX/4.1/administration/GUID-69DF70C2-1769-4858-97E7-B757CAED08F0.html#:~:text=On%20the%20north%2Dsouth%20traffic,Guest%20Introspection%20(GI)%20platform.
The main components on the edge node for north-south malware prevention perform the following functions:
* IDS/IPS engine: Extracts files and relays events and data to the security hub North-south malware prevention uses the file extraction features of the IDS/IPS engine that runs on NSX Edge for north-south traffic.
* Security hub: Collects file events, obtains verdicts for known files, sends files for local and cloud-based analysis, and sends information to the security analyzer
* RAPID: Provides local analysis of the file
* ASDS Cache: Caches reputation and verdicts of known files
NEW QUESTION # 68
HOTSPOT
Refer to the exhibit.
An administrator configured NSX Advanced Load Balancer to redistribute the traffic between the web servers. However, requests are sent to only one server Which of the following pool configuration settings needs to be adjusted to resolve the problem? Mark the correct answer by clicking on the image.
Answer:
Explanation:
Explanation:
Load Balancing Algorithm
You specify the following parameters during the creation of a server pool:
* Name: A unique name for the server pool.
* Cloud: The cloud connector details for the NSX environment.
* VRF Context: Virtual Routing Framework (VRF) is a method to isolate traffic in a system. VRF is also called a route domain in the load balancer community. A global VRF context is created by default.
Network administrators might create custom VRF contexts to isolate traffic between different tenants or subsets.
* Default Server Port: New connections to servers will use this destination service port. The default port is 80.
* Load-balancing algorithm: The selected load-balancing algorithm controls how the incoming connections are distributed among the servers in the pool.
* Tier-1 gateway (logical router): Specify the Tier-1 gateway that you want to attach the server pool to.
This value matches the Tier-1 gateway specified for the virtual service and VIP.
NEW QUESTION # 69
Drag and Drop Question
Match the NSX Intelligence recommendations with their correct purpose.
Answer:
Explanation:
Explanation:
The security policy recommendations are of the East-West distributed firewall (DFW) security policies in the application category.
The security group recommendations consist of the VMs or physical servers whose traffic flows were analyzed for the time period and the boundary you had specified.
The service recommendations are service objects that were used by applications in the VMs or physical servers that you had specified, but the services are not yet defined in the NSX inventory.
https://docs.vmware.com/en/VMware-NSX-Intelligence/4.1/user-guide/GUID-BA3B0D67-4AA8-
439E-A845-4598DAD6B9D0.html
NEW QUESTION # 70
An NSX administrator would like to create an L2 segment with the following requirements:
* L2 domain should not exist on the physical switches.
* East/West communication must be maximized as much as possible.
Which type of segment must the administrator choose?
- A. Bridge
- B. VLAN
- C. Hybrid
- D. Overlay
Answer: D
Explanation:
An overlay segment is a layer 2 broadcast domain that is implemented as a logical construct in the NSX-T Data Center software. Overlay segments do not require any configuration on the physical switches, and they allow for optimal east/west communication between workloads on different ESXi hosts. Overlay segments use the Geneve protocol to encapsulate and decapsulate traffic between the hosts. Overlay segments are created and managed by the NSX Manager.
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.2/administration/GUID-316E5027-E588-455C-88AD-A7DA930A4F0B.html
NEW QUESTION # 71
How is the RouterLink port created between a Tier-1 Gateway and Tier-0 Gateway?
- A. Manually create a Segment and connect to both Tier-1 and Tier-0 Gateways.
- B. Automatically created when Tier-1 is connected with Tier-0 from NSX Ul.
- C. Automatically created when Tier-1 is created.
- D. Manually create a Logical Switch and connect to bother Tier-1 and Tier-0 Gateways.
Answer: B
Explanation:
The RouterLink port between a Tier-1 Gateway and a Tier-0 Gateway is automatically created when the Tier-1 Gateway is connected to the Tier-0 Gateway through the NSX UI. This link enables routing between the Tier-1 and Tier-0 gateways without the need for manual configuration of segments or logical switches.
NEW QUESTION # 72
An administrator wants to validate the BGP connection status between the Tier-O Gateway and the upstream physical router.
What sequence of commands could be used to check this status on NSX Edge node?
- A. enable <LR-D> get vrf <ID>
show bgp neighbor - B. show logical-routers
get vrf
show ip route bgp - C. set vrf <ID> show logical-routers show <LR-D> bgp
- D. get gateways
vrf <number>
get bgp neighbor
Answer: D
Explanation:
The sequence of commands that could be used to check the BGP connection status between the Tier-O Gateway and the upstream physical router on NSX Edge node is get gateways, vrf <number>, get bgp neighbor. These commands can be executed on the NSX Edge node CLI after logging in as admin6. The first command, get gateways, displays the list of logical routers (gateways) configured on the Edge node, along with their IDs and VRF numbers7. The second command, vrf <number>, switches to the VRF context of the desired Tier-O Gateway, where <number> is the VRF number obtained from the previous command7. The third command, get bgp neighbor, displays the BGP neighbor summary for the selected VRF, including the neighbor IP address, AS number, state, uptime, and prefixes received8. The other options are incorrect because they either use invalid or incomplete commands or do not switch to the correct VRF context.
Reference: NSX-T Command-Line Interface Reference, NSX Edge Node CLI Commands, Troubleshooting BGP on NSX-T Edge Nodes
NEW QUESTION # 73
Which component needs to be available for the ESXi hosts to be able to enable vSphere High Availability?
- A. Dual CPU sockets
- B. 10Gbps network interfaces
- C. Shared data storage
- D. Direct attached disks
Answer: C
NEW QUESTION # 74
Which VPN type must be configured before enabling an L2VPN?
- A. Policy-based IPSec VPN
- B. Port-based IPSec VPN
- C. SSL-based IPSec VPN
- D. Route-based IPSec VPN
Answer: D
Explanation:
Before enabling an L2VPN (Layer 2 VPN) in NSX, a Route-based IPSec VPN must be configured. Route-based VPNs create a secure tunnel over which Layer 2 traffic can be extended, allowing for the creation of L2VPN connections. This setup is required to establish the underlying secure connectivity that L2VPN relies on for traffic between sites.
NEW QUESTION # 75
What are four NSX built-in role-based access control (RBAC) roles? (Choose four.)
- A. Full Access
- B. Enterprise Admin
- C. Read
- D. None
- E. Network Admin
- F. Auditor
- G. LB Operator
Answer: B,E,F,G
Explanation:
https://docs.vmware.com/en/VMware-NSX/4.1/administration/GUID-26C44DE8-1854-4B06- B6DA-A2FD426CDF44.html
NEW QUESTION # 76
DRAG DROP
Refer to the exhibits.
Drag and drop the NSX graphic element icons on the left found in an NSX Intelligence visualization graph to Its correct description on the right.
Answer:
Explanation:
Explanation:
https://docs.vmware.com/en/VMware-NSX-Intelligence/4.0/user-guide/GUID-DC78552B-2CC4-410D- A6C9-3FE0DCEE545B.html
NEW QUESTION # 77
A customer has a network where BGP has been enabled and the BGP neighbor is configured on the Tier-0 Gateway. An NSX administrator used the get gateways command to retrieve this information:
Which two commands must be executed to check BGP neighbor status? (Choose two.)
- A. sa-nsxedge-01(tier1_sr)> get bgp neighbor
- B. vrf 1
- C. vrf 3
- D. sa-nsxedge-01(tier0_sr)> get bgp neighbor
- E. sa-nsxedge-01(tier0_dr)> get bgp neighbor
- F. vrf 4
Answer: C,D
Explanation:
vrf 3: The VRF ID for the Tier-0 Service Router (SR) is 3, as indicated in the output. To check the BGP neighbor status, you need to enter the correct VRF context.
sa-nsxedge-01(tier0_sr)> get bgp neighbor: This command retrieves the BGP neighbor status on the Tier-0 Service Router, which is where BGP neighbors are configured in NSX environments.
NEW QUESTION # 78
Which three data collection sources are used by NSX Network Detection and Response to create correlations/Intrusion campaigns? (Choose three.)
- A. Files and anti-malware (lie events from the NSX Edge nodes and the Security Analyzer
- B. Distributed Firewall flow data from the ESXi hosts
- C. Suspicious Traffic Detection events from NSX Intelligence
- D. IDS/IPS events from the ESXi hosts and NSX Edge nodes
- E. East-West anti-malware events from the ESXi hosts
Answer: A,C,D
Explanation:
The correct answers are A. Files and anti-malware (file) events from the NSX Edge nodes and the Security Analyzer, D. IDS/IPS events from the ESXi hosts and NSX Edge nodes, and E. Suspicious Traffic Detection events from NSX Intelligence. According to the VMware NSX Documentation3, these are the three data collection sources that are used by NSX Network Detection and Response to create correlations/intrusion campaigns.
The other options are incorrect or not supported by NSX Network Detection and Response. East-West anti-malware events from the ESXi hosts are not collected by NSX Network Detection and Response3. Distributed Firewall flow data from the ESXi hosts are not used for correlation/intrusion campaigns by NSX Network Detection and Response3.
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.2/administration/GUID-14BBE50D-9931-4719-8FA7-884539C0D277.html
NEW QUESTION # 79
NSX improves the security of today's modern workloads by preventing lateral movement, which feature of NSX can be used to achieve this?
- A. Edge Firewalling
- B. Virtual Security Zones
- C. Dynamic Routing
- D. Network Segmentation
Answer: D
Explanation:
Network segmentation is a feature of NSX that improves the security of today's modern workloads by preventing lateral movement. Lateral movement is a technique used by attackers to move from one compromised system to another within a network, exploiting vulnerabilities or credentials. Network segmentation prevents lateral movement by dividing a network into smaller segments or zones, each with its own security policies and controls. This way, if one segment is compromised, the attacker cannot access other segments or resources. NSX enables network segmentation by using micro-segmentation, which applies granular firewall rules at the virtual machine level, regardless of the physical network topology.
NEW QUESTION # 80
When configuring OSPF on Tier-0 Gateway, which three of the following must match in order to establish a neighbor relationship with an upstream router? (Choose three.)
- A. Protocol and Port
- B. MTU of the Uplink
- C. Area ID
- D. Address of the neighbor
- E. Naming convention
- F. Subnet mask
Answer: B,C,F
Explanation:
Area ID: Both routers must belong to the same OSPF area for a neighbor relationship to form.
MTU of the Uplink: Mismatched MTU settings can prevent the OSPF adjacency from forming, as OSPF packets may be dropped if they exceed the MTU size.
Subnet mask: Both routers must have the same subnet mask on the interface where OSPF is configured to establish a neighbor relationship.
NEW QUESTION # 81
......
ActualCollection just published the VMware 2V0-41.24 exam dumps!: https://quizguide.actualcollection.com/2V0-41.24-exam-questions.html